6' x 4' x 6' Kennel Unit (Typical)
6' x 6' x 10' Kennel Unit (Typical)
Installing Kennel Panels in Desired Configuration / Bolting the Panels Together
Hoover Fence kennel panels may be installed in a number of different configurations; panels may be bolted together at right angles to one another, or at lesser or greater angles. Typical installations of kennels resemble a rectangular or square shape when viewed from the top.
|
|
6' x 4' x 6' Kennel Unit (Typical) |
6' x 6' x 10' Kennel Unit (Typical) |
Step 1
Place two panels upright and perpendicular to one another.
Step 2
Attach using 2 - 1 3/8" Saddle Clamps and 2 - 5/16" x 1 1/4" nuts and bolts; these simply sandwich the kennel panel frame.
|
|
1 3/8" Saddle Clamp w/ Bolt |
Step 3
Attach third panel using 2 - 1 3/8" Saddle Clamps and 2 - 5/16" x 1 1/4"" nuts and bolts.
Step 4
Attach Fourth panel using 2 - 1 3/8" Saddle Clamps and 2 - 5/16" x 1 1/4" nuts and bolts.
Step 5
Install 2 1 3/8" post caps per panel and one post cap per gate by tapping lightly with a hammer to prevent breaking.
1 3/8" Post Cap
If one is installing multiple units, attach additional panels on to base unit as desired using 1 3/8" saddle clamps and 5/16" x 1 1/4" nuts and bolts.
